BJWDV - 5155 ALUMINUM COATING CEMENT

  • MSDS: BJWDV
  • Manufacturer: GIBSON HOMANS CO
  • Product Name: 5155 ALUMINUM COATING CEMENT
  • National Stock Number: 8030-00F013998
Product Identification

Product ID:5155 ALUMINUM COATING CEMENT
MSDS Date:05/19/1987
FSC:8030
NIIN:00F013998
MSDS Number: BJWDV

Responsible Party
GIBSON HOMANS CO
1755 ENTERPRISE PARKWAY
TWINSBURG, OH 44087-5000
US

Emergency Phone: 330-425-3255/330-467-8128

Info Phone: 330-425-3255/330-467-8128

Cage: GIBS1

Contractor
GIBSON HOMANS CO
BALTIMORE, MD 21237-5000 US

Telephone: 410-391-4500/216-843-2982

Cage: GIBS1

Ingredients

STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS

CAS: 8052-41-3

RTECS: WJ8925000

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION. EYES: IRRITATION &
BLURRED VISION. INHALATION: NASAL & RESPIRATION IRRITATION,
DIZZINESS, NAUSEA, POSSIBLE UNCONSCIOUSNESS & EVEN ASPHYXIATION.
INGESTION: GASTROINTESTINAL IRRITATION , NAUSEA, VOMITING &
DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION. EYES: IRRITATION & BLURRED
VISION. INHALATION: NASAL & RESPIRATION IRRITATION, DIZZINESS,
NAUSEA, POSSIBLE UNCONSCIOUSNESS & EVEN ASPHYXIATION. INGESTION:
GASTROINTESTINAL IRRITATION , NAUSEA, VOMITING & DIARRHEA.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
CPR/OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:100F
Lower Limits:0.8
Upper Limits:7
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS. WATER MAY CAUSE FROTHING, APPLY CAUTIOUSLY.

Accidental Release

Spill Release Procedures:DIKE SPILL AREA. REMOVE SOURCES OF IGNITION.
VENTILATE AREA IF NECESSARY. RECOVER FREE LIQUID. ADD ABSORBENT TO
SPILL AREA.

Handling

Handling and Storage Precautions:KEEP AWAY FROM SOURCES OF IGNITION.
USE ONLY W/ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/SKIN. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:IF >TLV, A NIOSH/MSHA APPROVED BREATHING
APPARATUS IS RECOMMENDED. NOT NORMALLY NEEDED IN WELL VENTILATED
AREA.
Ventilation:PROVIDE ADEQUATE LOCAL EXHAUST/MECHANICAL VENTILATION TO
KEEP Protective Gloves:SOLVENT RESISTANT
Eye Protection:CHEMICAL GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:300-315F
Vapor Pres:2
Vapor Density:>1
Spec Gravity:1.0-1.5
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:INSOLUBLE
Appearance and Odor:GOLDISH TO SILVERISH LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS & BASES
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:CO2, CO

Disposal

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.